How to Decorate a Jewelry Box

Update time : 2019-05-06 00:01:46

A repurposed jewelry box can be a big addition to your family dÃ©cor or compose a personalized capacity because a friend. Customizing your same get jewelry box is joy and easy. grab your paint, paper, and stencils and acquire started can your get one-of-a-kind jewelry box!

1. example Your jewelry box

1) inspire or place clean the inside liner. if possible, inspire the inside liner. if not, place clean the liner with concentrated laundry detergent. Dab a piece of the laundry detergent can the colour and allow sit because few minutes. Then use a wet cloth to clean the place away. Spray the liner with a water and vinegar solution if the box smells musty. desert the jewelry box hole and allow it stand dry ago painting.

If the liner is also soiled, use fabric, tissue paper, or colour to cover the stained liner.

2) clean the external of the jewelry box with dish soap and a wet cloth. if the jewelry box has cup panels, inspire the panes and clean with a cup cleanser. use a residue remover because sticky substances, such though tape or charge tags. compose certain the external is completely dry ago starting to paint.

3) inspire any hardware and gently sand the external wooden surface. use a medium grit sandpaper to inspire bumps and scratches. use a finer grit sandpaper to total smoothing the wood. earth the jewelry box off with a wet cloth to inspire any remaining dust.

4) use primer to the jewelry box. cover any isolate of the jewelry box you conduct no expect to colour with apt and painterâs tape. use a layer of primer and allow it to completely dry ago painting.

5) colour the total surface of the box. You can use many different types of paint. because a brave look, use a wise colored acrylic or metallic paint. because a more distressed look, use a chalk based paint. use stencils to add designs or revolve your get maiden freehand patterns.

Always memorize to colour at thin, level coats to hinder running.
Chalk based paints lack to be sealed with wax or the colour will rub off.

6) use a layer of lacquer because a glossy finish. compose certain the colour and lacquer are completely dry ago reattaching the hardware.

2. Using Decoupage can Wooden jewelry boxes

1) clean and sand the jewelry box. clean the inside and external surfaces with dish soap and water. own the box hole and allow it stand dry. Once the box is dry, use a fairly grit sandpaper to level the external surface. after sanding, earth the jewelry box with a wet cloth to inspire any additional dust.

2) elect out the images you expect to use because your design. chop out the pictures because your design. Many different types of apt can be used, including wrapping paper, scrapbooking paper, and magazines.

The thinner the apt is, the better. Thinner pictures place flatter and use fewer layers of varnish to embed into the wood.

3) use the initial layer of varnish and allow it completely dry. Once it is dry, use a piece of steel wool to gently polish the box.

4) classify the pictures into your desired design. Once you dine your preferred pattern, use some varnish to the uphold of the images. place the pictures level and cane them to the jewelry box. use another layer of varnish to the total box.

5) use more layers of varnish. tolerate to use layers of varnish until the pictures are completely embedded into the lumber surface.

Let each layer of varnish dry completely ago adding another layer.
Lightly polish each layer of varnish with steel wool because a glossier finish.

3. Using Stencils

1) clean the jewelry box with dish soap and water. Once it is completely dry, gently sand the external of the box. after sanding, earth down the jewelry box with a wet cloth to inspire any excess dust.

2) place your stencil can the isolate of the box you expect to decorate. use a repositionable spray adhesive can the uphold of the stencil. Spray can the adhesive until the stencil is sticky, besides during no wet. if you conduct no dine a spray adhesive, you can too use painterâs tape to own the stencil from moving.

3) use a tapping motion to colour your design. accept a level bristled stencil brush and use the colour onto your brush and earth the excess colour off onto a apt towel. tap the colour evenly onto the stencil. colour the total create at the too time.

Do no swirl or swipe the brush when example your design. Tapping the brush reduces the possibility of the colour bleeding.

4) inspire the stencil from the wooden surface. Carefully originate the stencil to compose certain to no break the stencil. compose certain to allow the colour completely dry.

5) clean your stencils to hinder colour buildup. wet your stencils at soapy water exact after use. after soaking because few minutes, gently rub colour off with a dish brush. use a towel to tap dry the stencil.

6) department your stencils flat. Rolling your stencils can break them.

4. Making a Mosaic Design

1) elect a material to use because your design. because a more reflective look, use cup or mirror pieces. Beads and seashells give a textured look. Ceramic and porcelain are too usual tesserae (mosaic materials).

2) revolve your design. You can conduct this by arranging the tesserae can the jewelry box or by example the create can a piece of paper. because a simple design, experiment a bloom or multicolored circles or swirls. because a more advanced pattern, experiment creating a scene, such though a plantation or city skyline.

3) place down the adhesive at sections. experiment to fly using also much adhesive. It can dry out ago you acquire to a zone or promote up between the tesserae, leaving no room because the grout.

Most silicone-based adhesives work can non-porous materials. White glue too factory robust can jewelry boxes.

4) chop the tesserae into desired shapes and sizes. You can use too a tile nipper or a wheeled cup nipper to chop tesserae. at order to chop the pieces, place the material into the mouth of the installation and jam down. Using these tools allows you to compose concrete sizes and shapes because your design.

You can too buy premade tesserae from canoe stores.

5) place the tesserae onto the adhesive. memorize to desert space between the pieces at order to desert room because the grout. A good direct of thumb is to desert 1/8â to 1/2â between pieces after you are done completing your design, allow the piece sit because 24-48 hours ago applying the grout.

6) mingle the grout at a disposable container. hunt the instructions can the pack to compose the grout. Add a tablespoon of water to the grout to give it an oatmeal consistency.

7) use the grout to the total piece. wear gloves when applying the grout to fly drying out your hands. Generously cover the total design. journal the grout into the spaces between tesserae. Sculpt the grout approximately the edges. earth any excess grout off with hands. allow the grout sit because 20-30 minutes until it looks hazy.